UpdateNLBListenerAttribute - UpdateNLBListenerAttribute
Overview
UpdateNLBListenerAttribute
Definition
Public Parameters
| Parameter Name | Type | Description Information | Required |
|---|---|---|---|
| Action | string | Corresponding API command name, the current API is UpdateNLBListenerAttribute. | Yes |
| PublicKey | string | The user’s public key can be obtained from Console | Yes |
| Signature | string | User signature generated based on public key and API command, see Signature Algorithm | Yes |
Request Parameters
| Parameter Name | Type | Description Information | Required |
|---|---|---|---|
| Region | string | Region. See Region and Zone List | Yes |
| ProjectId | string | Project ID. Leave it blank for the default project. Sub-accounts must fill in. Please refer to the GetProjectList API | No |
| NLBId | string | ID of the Load Balancing Instance | Yes |
| ListenerId | string | ID of the Load Balancing Instance | Yes |
| Name | string | Name of the listener | No |
| Remark | string | Remarks of the Listener | No |
| StartPort | int | Starting port of the port range. Specified value range: [1-65535]. Default value is 1, only full port mode supports modification. | No |
| EndPort | int | End port of the port range. Limited value: [1-65535]. The value is not less than the starting port. The default value is 65535, only the full port mode supports modification. | No |
| Scheduler | string | Load Balancing Algorithm Limited values: ‘RoundRobin’/‘SourceHash’/‘LeastConn’/‘WeightLeastConn’/‘WeightRoundRobin’ Default value ‘RoundRobin’. | No |
| StickinessTimeout | int | Session keep-alive timeout. Unit: seconds Explanation: Limited value: [60-900], 0 means session keep-alive is not enabled Default value 60 | No |
| ForwardSrcIPMethod | string | Method of delivering source IP. Limited values: "" / “None” / “Toa”. Empty string and None mean off. | No |
| HealthCheckConfig.Enabled | boolean | Whether to enable the health check function. Temporarily does not support closing, default is true. | No |
| HealthCheckConfig.Port | int | Health Check Probe Port Description: Limited value range: [1-65535] | No |
| HealthCheckConfig.Type | string | Health Check Method Limited Values: “Port”/“UDP”/“Ping” Default Value: “Port” | No |
| HealthCheckConfig.ReqMsg | string | Request string for UDP check mode | No |
| HealthCheckConfig.ResMsg | string | Expected response string for “UDP” check mode | No |
Response Field
| Field Name | Type | Description Information | Required |
|---|---|---|---|
| RetCode | int | Return status code. If it is 0, it means successful return. If it is not 0, it means failure. | Yes |
| Action | string | Operation command name. | Yes |
| Message | string | Returns an error message, providing detailed description when RetCode is non-zero. | No |
Example
Request Example
https://api.dezai.com/?Action=UpdateNLBListenerAttribute
&Region=cn-zj
&Zone=cn-zj-01
&ProjectId=lYIktcFh
&NLBId=WSAPopZX
&ListenerId=FeUBtqTg
&Name=BkVDOGZZ
&Remark=zjRVFQVu
&Scheduler=RgCTjVdZ
&StickinessTimeout=6
&HealthCheckConfig=pSNguzLp
&StartPort=9
&EndPort=4
&HealthCheckConfig.Port=1
&HealthCheckConfig.Type=wvhRZsuN
&HealthCheckConfig.Interval=3
&HealthCheckConfig.MinSuccess=7
&HealthCheckConfig.MaxFail=3
&HealthCheckConfig.ReqMsg=tEjwkHxq
&HealthCheckConfig.ResMsg=AJXQCEfb
&ForwardSrcIPMethod=ZigBubeF
Response Example
{
"Action": "UpdateNLBListenerAttributeResponse",
"RetCode": 0
}