Check Task - CheckUDTSTask

Overview

Provide pre-check function for UDTS tasks

Definition

Public Parameters

Parameter Name	Type	Description Information	Required
Action	string	Corresponding API command name, the current API is `CheckUDTSTask`.	Yes
PublicKey	string	The user’s public key can be obtained from Console	Yes
Signature	string	User signature generated based on public key and API command, see Signature Algorithm	Yes

Request Parameters

Parameter Name	Type	Description Information	Required
ProjectId	string	Project ID. If not filled in, the default project is used, sub-accounts must be filled in. Please refer to the GetProjectList interface.	No
Name	string	Task name, length cannot exceed 128	Yes
Type	string	Task type, value is either ‘transfer’ or ‘integration’. When it’s ‘transfer’, the task is ‘Data Migration’. When it’s ‘integration’, the task is ‘Data Integration’.	Yes
MaxRetryCount	string	Retry times, maximum is 5. Default is 0.	Yes
Source.N.ServiceType	string	Service type, the value can be small, medium, large, corresponding to “Basic Edition”, “Light Edition” and “Flagship Edition” respectively.	Yes
Source.N.Mode	string	Task mode, the value can be full, incremental, full+incremental, bidirectional	No
Source.N.DataType	string	Database type, such as mysql	No
Source.N.NWType	string	Source network type, can be public, user, dedicated_line	No
Source.N.MySQLNode.Host	string	Source database address, for example 10.9.37.200	No
Source.N.MySQLNode.Port	int	Source MySQL port, such as 3306	No
Source.N.MySQLNode.User	string	Source MySQL username, such as root	No
Source.N.MySQLNode.Password	string	Source MySQL Password	No
Source.N.MySQLNode.VPCId	string	VPC ID, can be obtained from https://console.dezai.com/vpc/vpc, for example, uvnet-u0ecace	No
Source.N.MySQLNode.SubnetId	string	Subnet ID, which can be obtained from https://console.dezai.com/vpc/subnet, for example subnet-2sloxs	No
Source.N.MySQLNode.DataRegion	string	Database region, for example cn-bj2	No
Source.N.MySQLNode.Database	string	Name of the DB to be migrated	No
Source.N.MySQLNode.Table	string	Name of the table to be migrated	No
Source.N.MySQLNode.SyncData.BinlogName	string	The binlog name needs to be specified during the incremental time, which can be obtained through the ‘show master status’ command, or it will be automatically set in the full + incremental task.	No
Source.N.MySQLNode.SyncData.BinlogPos	int	The binlog pos that needs to be specified during incremental time can be obtained through show master status, or it will be automatically set by full + incremental tasks.	No
Source.N.MySQLNode.SyncData.ServerID	int	The serverID that needs to be specified during the increment cannot be duplicated with the existing slave. This value will be checked during the pre-check.	No
Source.N.MySQLNode.SyncData.BinlogGTID	string	The binlog gtid that needs to be specified during the incremental time can be obtained through the show master status, or it will be automatically set by the full + incremental task.	No
QueryData.N.DBName	string	Name of the DB to be migrated during data integration	No
QueryData.N.NewDBName	string	DB Name after Data Integration Migration	No
Query	string	Discard	No
Target.DataType	string	Target database type, for example mysql	No
Target.NWType	string	Target db network type, currently only supports user	No
Target.MySQLNode.Host	string	Target database address, for example 10.9.37.212	No
Target.MySQLNode.Port	int	Target database port, for example 3306	No
Target.MySQLNode.User	string	Target database username, for example root	No
Target.MySQLNode.Password	string	Target Database Password	No
Target.MySQLNode.VPCId	string	Target Database VPC, for example uvnet-1wz5rqte	No
Target.MySQLNode.SubnetId	string	Target database subnet ID, for example subnet-zl44fktq	No
Target.MySQLNode.DataRegion	string	Target database region, for example cn-bj2	No

Response Field

Field Name	Type	Description Information	Required
RetCode	int	Return status code. If it is 0, it means successful return. If it is not 0, it means failure.	Yes
Action	string	Operation command name.	Yes
Message	string	Returns an error message, providing detailed description when `RetCode` is non-zero.	No
Data	CheckUDTSTaskResult	Check Result	Yes

Data Model

CheckUDTSTaskResult

Field Name	Type	Description Information	Required
Source	CheckResult		No
Target	CheckResult		No

CheckResult

Field Name	Type	Required
Config	CheckResultItem	No
Connection	CheckResultItem	No
Privileges	CheckResultItem	No

CheckResultItem

Field Name	Type	Description Information	Required
State	string		Yes
ErrMessage	string		Yes

Example

Request Example

https://api.dezai.com/?Action=CheckUDTSTask
&ProjectId=ySxOuFNP
&Name=iybJMhOY
&Type=kKLbtCIE
&Source=WQVyJAPj
&Target=ELyCuYTU
&MaxRetryCount=ozdxEUIr
&Query=PizEAjrP
&Source.N.Mode=PzcXhLrG
&Source.N.DataType=bZWssMSz
&Source.N.NWType=QTIhWJAT
&Source.N.MySQLNode.Host=tYybGVwL
&Source.N.MySQLNode.Port=2
&Source.N.MySQLNode.User=IVvsQESS
&Source.N.MySQLNode.Password=rehIyiiG
&Source.N.MySQLNode.VPCId=oslSTCGw
&Source.N.MySQLNode.SubnetId=knkzvAuv
&Source.N.MySQLNode.DataRegion=BsDfVJsM
&Source.N.MySQLNode.Database=ICfGrSzd
&Source.N.MySQLNode.Table=sSYUlfrC
&Source.N.MySQLNode.SyncData.BinlogName=aUVlvMba
&Source.N.MySQLNode.SyncData.BinlogPos=9
&Source.N.MySQLNode.SyncData.ServerID=9
&Source.N.MySQLNode.SyncData.BinlogGTID=ZfHgMkbW
&Source.N.MySQLNode.QueryData.N.DBName=AXGkZnMf
&Source.N.MySQLNode.QueryData.N.NewDBName=hGUvPTmf
&Target.DataType=vcFAMLPD
&Target.NWType=ttJRgGYj
&Target.MySQLNode.Host=UJQuSQBf
&Target.MySQLNode.Port=4
&Target.MySQLNode.User=FzrvgBcz
&Target.MySQLNode.Password=LbAmOPmz
&Target.MySQLNode.VPCId=kFiSKqpB
&Target.MySQLNode.SubnetId=VTTYIvGY
&Target.MySQLNode.DataRegion=MzdqBMqb
&Source.N.ServiceType=epppksUq

Response Example

{
  "Action": "CheckUDTSTaskResponse",
  "Data": {},
  "Message": "aKSpQMwy",
  "RetCode": 0
}

Index CreateUDTSTask