Add new protection domain configuration - AddWafDomainHostInfo

Overview

Add new protection domain configuration

Definition

Public Parameters

Parameter Name	Type	Description Information	Required
Action	string	Corresponding API command name, the current API is `AddWafDomainHostInfo`.	Yes
PublicKey	string	The user’s public key can be obtained from Console	Yes
Signature	string	User signature generated based on public key and API command, see Signature Algorithm	Yes

Request Parameters

Parameter Name	Type	Description Information	Required
ProjectId	string	Project ID. If not filled in, the default project is used, and the sub-account must be filled in. Please refer to the GetProjectList interface.	No
FullDomain	string	Domain to be protected	Yes
WorkRegions	string	Workspace, a subset of the areas purchased by the user, separated by commas, such as: cn-bj,cn-sh	Yes
WorkMode	string	Working Mode, Defence: Enable Protection Rules, Alarm: Record without Blocking, Inactive: Allow; Default Alarm	No
SrcIP.N	string	Origin IP port information, format is: http://192.168.1.1 or http://192.168.1.1:80; compatible with http:192.168.1.1:80, supports CNAME	No
CertificateID	int	HTTPS certificate number, required when the origin prefix is https	No
HTTPRedirection	string	Use HTTP redirection, YES for enabled, NO for disabled. Only allowed to use in situations where HTTPS:YES, HTTP:NO and only the source station configured with https 443 port is set up.	No
ExclusiveIP	string	Indicates that this domain name uses a dedicated defense IP, YES for yes, NO for no; enabling will assign a dedicated defense IP to this domain name.	No
RealIPHeader	string	Obtain the real client address field, used when docking with other proxies such as CDN.	No
HTTPBack	string	Use HTTPS offloading, YES/NO	No
SourceIndicate	string	Traffic tagging, format as key:value	No
Http2	string	Enable HTTP2? YES to enable, others to disable.	No
SrcLBMode	string	Origin server load balancing strategy, default is Round Robin (RR), options include: IpHash, RR	No

Response Field

Field Name	Type	Description Information	Required
RetCode	int	Return status code. If it is 0, it means successful return. If it is not 0, it means failure.	Yes
Action	string	Operation command name.	Yes
Message	string	Returns an error message, providing detailed description when `RetCode` is non-zero.	No
Id	int	Domain configuration ID returned after successful addition	No

Example

Request Example

https://api.dezai.com/?Action=AddWafDomainHostInfo
&ProjectId=org-xxx
&FullDomain=www.test.com
&WorkRegions=cn-gd
&SrcIPNum=1
&SrcIP.0=http://106.75.66.11:80
&CertificateID=0
&ExclusiveIP=No
&HTTPBack=jQqKWgcf
&SourceIndicate=VyxSQeOP
&HTTP2=pUmPZWTR
&SrcLBMode=sPEOjSVl

Response Example

{
  "Action": "AddWafDomainHostInfoResponse",
  "Id": 9,
  "RetCode": 0
}

AddWafDomainCertificateInfo AddWafDomainWhiteList