CreateNLBListener - CreateNLBListener

Overview

Create NLB Listener

Definition

Public Parameters

Parameter Name	Type	Description Information	Required
Action	string	Corresponding API command name, the current API is `CreateNLBListener`.	Yes
PublicKey	string	The user’s public key can be obtained from Console	Yes
Signature	string	User signature generated based on public key and API command, see Signature Algorithm	Yes

Request Parameters

Parameter Name	Type	Description Information	Required
Region	string	Region. See Region and Zone List	Yes
ProjectId	string	Project ID. Leave it blank for the default project. Sub-accounts must fill in. Please refer to the GetProjectList API	No
NLBId	string	ID of the Network Load Balance	Yes
Name	string	Name of the listener Character length limit: [1-255] Special characters allowed: -_. Default value: listener	No
Remark	string	Remarks for the listener Character length limit: [0-255]	No
StartPort	int	Start port of the port range Limited value: [1-65535] Default value 1	No
EndPort	int	End port of the port range Limited value: [1-65535] The value is not less than the start port Default value 65535	No
Protocol	string	Monitoring Protocol Limited values: “TCP”/“UDP”.	No
Scheduler	string	Load Balancing Algorithm Limited values: “RoundRobin”/“SourceHash”/“LeastConn”/“WeightLeastConn ”/“WeightRoundRobin” Default value “RoundRobin”	No
StickinessTimeout	int	Session keep-alive timeout. Unit: seconds Limited value range: [60-900], 0 means session keep-alive is not enabled Default value 60	No
HealthCheckConfig.Enabled	boolean	Whether to enable the health check function. Temporarily does not support closing, default is true.	No
HealthCheckConfig.Port	int	Health Check Detection Port Description: Limited Value Range: [1-65535]	No
HealthCheckConfig.Type	string	Health Check Method Limited Values: “Port”/“UDP”/“Ping”/“HTTP” Default Value: “Port	No
HealthCheckConfig.ReqMsg	string	Request string for UDP check mode	No
HealthCheckConfig.ResMsg	string	Expected response string for “UDP” check mode	No
ForwardSrcIPMethod	string	Method of Passing Source IP Limited values: "" / “None” / “Toa”, both empty string and None represent turning off.	No

Response Field

Field Name	Type	Description Information	Required
RetCode	int	Return status code. If it is 0, it means successful return. If it is not 0, it means failure.	Yes
Action	string	Operation command name.	Yes
Message	string	Returns an error message, providing detailed description when `RetCode` is non-zero.	No
ListenerId	string	Listener’s ID	Yes

Example

Request Example

https://api.dezai.com/?Action=CreateNLBListener
&Region=cn-zj
&Zone=cn-zj-01
&ProjectId=MARULUOv
&NLBId=GNvXptgc
&Name=LtMcdpyQ
&Remark=urkacxDK
&StartPort=5
&EndPort=4
&Protocol=vfTQAfIi
&Scheduler=mYCNnjfx
&StickinessTimeout=7
&HealthCheckConfig=WHmazuVn
&HealthCheckConfig.Port=7
&HealthCheckConfig.Type=OTsPFkqI
&HealthCheckConfig.Interval=3
&HealthCheckConfig.MinSuccess=8
&HealthCheckConfig.MaxFail=5
&HealthCheckConfig.ReqMsg=AQIXJQZS
&HealthCheckConfig.ResMsg=bBBpmaEy
&ForwardSrcIPMethod=aRYJWQFx

Response Example

{
  "Action": "CreateNLBListenerResponse",
  "ListenerId": "WVmnGcQN",
  "RetCode": 0
}

AddNLBTargets CreateNetworkLoadBalancer